Torque Tester 0.10 - 0 N･m DI-11 Cedar

Specification

DI-11

Measuring range  
(at the time of Track)

0.10～20 N･m

　1.0～200 kgf・cm

1.0～174 lbf・in

Accuracy

±0.5％（F/S）(499 or less digit±3digit)

Display

The 4 figures digital display of LED

The measurement direction

CW-CCW (right and left)

Measuring 
mode

P-P  Peak

Peak load value hold

T-R  Track

Indication of real time torque value.

P-D  Peak down

Holding Load Value at the moment to change from upward to downword

C(Real-time Output)

Load torque value is outputted every about 1/ 180 second.

clearance

It is a display clearance in set-up time.   (0.1 - 3.0 sec)

Data output

ASCII Format (baud rate 19200)

Auto power save

10 minutes no use, automatically switch off.

Charging time

From empty - less than 6hours

Continunous working time

12 hours

Weight

About 1.5kg

Outside dimension

130（W）×180（D）×34（H）

Attachment

Measurement joint 　SJ-50 / SJ-100

Accessories
(one piece each)

AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)

Exclusive receipt case

An inspection report, a proofreading certificate,
traceability system figure